DDNS Client

If you want to set up a DDNS Server instead, please see ddns.server.
See also https://wiki.openwrt.org/doc/howto/ddns.client

DDNS stands for Dynamic DNS. Simply put, using this service gives a name to your IP. So if you're hosting something on your line, people would not have to bother typing your IP. They can just type in your domain name! It also helps when your IP changes. Users won't need to discover what your new IP is, they can simply type your domain name.

This guide will help you configure your DDNS service, so that your router auto-updates your IP to your DDNS provider. The simplest method possible would be through LuCI (the default webUI for OpenWrt).

OpenWrt uses ddns-scripts which are Bourne shell scripts.
There are other scripts and programs available in the web, also some DDNS providers offer their own programs. All of them are currently not ported and tested on OpenWrt.

First of all, you'll need to pick and register a DNS name with a compatible DynamicDNS service provider.
For a list of DDNS providers, see:

1) requires additional package ddns-scripts_no-ip_com to be installed.
2) needs additional package ddns-scripts_cloudflare to be installed.
3) directly updates a PowerDNS (or maybe bind server) via nsupdate.
4) needs additional package ddns-scripts_nsupdate and bind-client to be installed.
5) SSL support required.
6) support IPv6

If you have picked a DDNS service provider and create your host/domain name you need to note additional your username and password.
Now you need to decide if you want to use secure communication with your DDNS provider or not.
Some provider require secure (HTTPS) communication. Read their help pages for details and also read provider specific informations below.

If you need support, found an issue or only want to request a new extension for the next release, please post your questions/issues/requests here: (Don't forget to post informations about your used software versions.)

A full list of supported settings (some not supported by LuCI webUI):

The source code is available at GitHub:

using LuCI

  • Login into your router through your browser.
  • From the menu select 'System' → 'Software'
  • Press button [Update Lists] to update internal lists of available packages.
  • Filter for ddns and install luci-app-ddns package. Installing the package luci-app-ddns will automatically install the package ddns-scripts.
  • You might need to install provider specific packages ddns-scripts_xxxxx and LuCI language packages luci-i18n-ddns-xx.
  • After luci-app-ddns (and other packages) are installed, just press any other menu entry on the LuCI webUI, and the page will refresh itself and it will appear in the menu under 'Services' → 'Dynamic DNS'.

via console

To install ddns-scripts use the OPKG Package Manager
You might need to install provider specific packages ddns-scripts_xxxxx

opkg update
opkg install ddns-scripts
opkg install ddns-scripts_xxxxx

SSL support

By default ddns-scripts uses BusyBox built-in 'wget' for DDNS updates over http, which does not support https (SSL).
To perform DDNS updates over https (SSL), you will need to install the 'wget' or 'curl' package, and add the appropriate root certificate for your ddns provider.

If both 'wget' and 'curl' are installed you can configure which one to prefer. Default is 'wget'.

You can install either via LuCI (from the menu select 'System' → 'Software') and search for 'wget' or 'curl'
or install via console using following commands:

opkg update
opkg install wget     # normally you only need
opkg install curl     # either wget or curl
opkg install ca-certificates

:!: If you, also for other software, need all certificates in one file or you want to update CA certificates regulary, then do NOT install 'ca-certificates' package.
'ca-certificate' package is not always backported to older OpenWrt versions. Install latest CA certificates (in one file) using console:

mkdir -p -m0755 /etc/ssl/certs
curl -o /etc/ssl/certs/ca-certificates.crt http://curl.haxx.se/ca/cacert.pem   # using curl
wget  --no-check-certificate -O /etc/ssl/certs/ca-certificates.crt http://curl.haxx.se/ca/cacert.pem   # using wget

other functions

FIXME This does not belong to the Installation section. Move it to where it better fits the context.tmomas 2017/04/24 01:05

ddns-scripts support other special communication functions to be used:

  • Run once (useful for usage with crond)
  • Set proxy with/without authenfication for http/https requests
  • Set DNS server to use other than system default
  • Binding to specific network if wget or to specific interface if curl installed.
  • Force the usage of either IPv4 or IPv6 communication only. Require either wget or curl AND bind-host !
  • DNS requests via TCP. Require either wget or curl AND bind-host !

Basics

ddns-scripts are designed to update one host per configuration/section. To update multiple hosts or providers or IPv4 and IPv6 for the same host you need to define separate configurations/sections. Some providers offer to update multiple host within one update request. A possible solution for this option is to use –custom– service name settings. Have a look at Provider specifics.

The main settings you need to set are (all other normally work fine with the defaults):

Service name the DDNS service provider to use
Host/Domain your FQDN you want to update (used by ddns-scripts using nslookup to check if update has happen)
Username username or other parameter to use as username (send urlencoded)
Password password or other parameter to use as password (send urlencoded)
:!: including BB 14.07 Ensure this password does not have “$1” or $ with any number following in it, as this breaks the script.
Interface network name (i.e. wan, wan6) used by OpenWrt hotplug event system to start ddns-scripts

:!: since DD (trunk) the following main settings need to be set:

Service name the DDNS service provider to use
Lookup Host ONE of your defined FQDN you want to update (used by ddns-scripts using nslookup to check if update has happen)
Host/Domain mostly same as 'Lookup Host', but now can also be used as “normal” parameter. i.e. as list of hosts to be updated
Username username or other parameter to use as username (send urlencoded)
Password password or other parameter to use as password (send urlencoded)
Interface network name (i.e. wan, wan6) used by OpenWrt hotplug event system to start ddns-scripts

After fresh installation a configuration/section 'myddns' and 'myddns_ipv4' and 'myddns_ipv6' exists ready to be modified for your needs.
You could delete them and define your own.

Please heed the following important hints:

  • It is NOT allowed to use dash-sign “-” inside configuration/section names.
  • A full list of supported settings (some not supported by LuCI webUI) you will find in UCI documentation!
  • Always keep in mind the Provider specific settings if there are any!
  • Don't forget to enable your configuration/section!
  • You need minimum one enabled configuration/section for ddns service to start!
  • You need to enable ddns service to enable updates being sent on reboot and hotplug events!
  • Although described elsewhere, it is not recommended to change the files '/usr/lib/ddns/services' or '/usr/lib/ddns/services_ipv6' because they will be overwritten during system and package updates!

using LuCI

  • Login into your router through your browser.
  • From the menu select 'Services' → 'Dynamic DNS'.
  • Navigate to the configuration/section you like to change.
  • Modify the fields you need to change.
  • Don't forget to check the 'Enabled' option!
  • Click [Save & Apply] button to save changes.

To add a new configuration/section:

  • Type the new name into the text entry box at the bottom of the page next to [Add] button.
    :!: Do not use a dash character “-” in configuration/section name!
  • Click [Add] button.
  • Modify the fields you need to change.
  • Don't forget to check the 'Enabled' option!
  • Click [Save & Apply] button to save changes.

'Username' and 'Password' fields are required fields. If your provider does not require one or both of them, simply put in a character of your choice.

:!: You need to enable ddns service!
From the menu select 'System' → 'Startup'.
Set ddns service to enabled.

SSL Support

Options to configure HTTPS communication are only available if wget or curl package is installed. (See Hints if shown.)

  • Check 'Use HTTP Secure' option. Additional field 'Path to CA-Certificate' is shown with it's default setting.
    • If you have installed ca-certificates package leave the shown default! (/etc/ssl/certs)
    • If you have installed CA certificates in one file from above set the value to: /etc/ssl/certs/ca-certificates.crt
    • If you like to use other certificate you need to set here the full path to the certificate including file name. (/path/to/file.crt)
    • If your certificates are stored in a different path, set here the path where your certificates are located. (/path/to/files)
  • Click [Save & Apply] button to save changes.

Custom Service

If you want to use a DDNS provider currently not listed or you want to update multiple hosts within one configuration/section then you should do the following:

  • Choose '–custom–' as service. Additional field 'Custom update-URL' is shown.
  • Fill in the URL you like to use. :!: Please read URL syntax description below. Also have a look at Provider specifics.
  • Click [Save & Apply] button to save changes.

:!: If you found a DDNS provider not listed or with additional IPv6 support or with changed update URL please open an issue at Github-OpenWrt-Packages so it can be included with the next release.

via console

The easiest way to configure ddns-scripts via console is to edit the file /etc/config/ddns directly using build-in vi editor or any other editor you prefer. Other editors as vi needs to be installed separately.

A configuration/section looks like:

config 'service' 'myddns'
	option 'service_name'	'example.org'
	option 'enabled'	'1'
	option 'domain'		'yourhost.example.org'
	option 'username'	'your_username'
	option 'password'	'your_password'
	option 'interface'	'wan'
	option 'ip_source'	'network'
	option 'ip_network'	'wan'

Alternatively you can use UCI command line interface.
Example input:

uci set ddns.myddns.service_name="ddnsprovider.com"	# only use names listed in /usr/lib/ddns/services 
							# or /usr/lib/ddns/services_ipv6 (since CC 15.05)
uci set ddns.myddns.domain="host.yourdomain.net"
uci set ddns.myddns.username="your_user_name"
uci set ddns.myddns.password="p@ssw0rd"
uci set ddns.myddns.interface="wan"	# network interface that should start this configuration/section
uci set ddns.myddns.enabled="1"
uci commit ddns				# don't forget this, otherwise data not written to configuration file

ddns.myddns.enabled=“1” means:

  • 'ddns' is the configuration file to change (here /etc/config/ddns)
  • 'myddns' is the configuration/section to change
  • 'enabled' is the option to set/change
  • behind the equal-sign is the value to set. :!: Set single- or double-quotes around the value and no space or whitespace around the equal-sign.

Example to create/add a new configuration/section “newddns”:

uci set ddns.newddns="service"
uci set ddns.newddns.service_name="ddnsprovider.com"	# only use names listed in /usr/lib/ddns/services
							# or /usr/lib/ddns/services_ipv6 (since CC 15.05)
uci set ddns.newddns.domain="host.yourdomain.net"
uci set ddns.newddns.username="your_user_name"
uci set ddns.newddns.password="p@ssw0rd"
uci set ddns.newddns.interface="wan"	# network interface that should start this configuration/section
uci set ddns.newddns.enabled="1"
uci commit ddns				# don't forget this, otherwise data not written to configuration file

:!: You need to enable ddns service by:

/etc/init.d/ddns enable

SSL Support

You need to add the following entries to the desired section in '/etc/config/ddns' file:
using 'ca-certificates' package:

config 'service' 'myddns'
	...
	option 'use_https'	'1'
	option 'cacert'		'/etc/ssl/certs'

using single file (ie. as descriped above):

config 'service' 'myddns'
	...
	option 'use_https'	'1'
	option 'cacert'		'/etc/ssl/certs/ca-certificates.crt'
#	option 'cacert'		'/full/path/to/file.crt'

Above options can also be set via LuCI webUI.
The options are only shown if 'wget' or 'curl' package is installed!

Custom Service

Following changes need to be done if you use a DDNS provider currently not listed or to update multiple hosts within one configuration/section.
Edit '/etc/config/ddns'

config 'service' 'myddns'
	...
#	option 'service_name'	'example.org'		# comment out "#" or delete
	option 'update_url'	'http://your.update.url...[USERNAME]...[PASSWORD]...[DOMAIN]...[IP]'

or use UCI command line interface

uci delete ddns.myddns.service_name
uci set ddns.myddns.update_url="http://your.update.url...[USERNAME]...[PASSWORD]...[DOMAIN]...[IP]"
uci commit ddns		# don't forget this, otherwise data not written to configuration file
URL Syntax

:!: It's not needful to set 'https://'. If SSL support is activated 'http://' is replaced automatically.
:!: The entries [USERNAME] [PASSWORD] [DOMAIN] [IP] are replaced by ddns-scripts just before update.
[USERNAME] is replaced by content of 'option username' from configuration file.
[PASSWORD] is replaced by content of 'option password' from configuration file.
[DOMAIN] is replaced by content of 'option domain' from configuration file.
[IP] is replaced by the current IP address of your OpenWrt system.

:!: carefully set 'option domain' in your configuration. This option is also used to detect if the update was successfully done.
:!: This entry is the DNS name your OpenWrt system will be reachable from the internet.
:!: Have a look at Provider specifics for samples.

:!: If you found a DDNS provider not listed or with additional IPv6 support or with changed update URL please open an issue at Github-OpenWrt-Packages so it can be included with the next release.

Detecting local IP

Here a list (without preferences) of url's to detect your current public ip used by your system:

Dual-Stack IPv4-only IPv6-only Server Location
http://checkip.dns.he.net/ US
http://checkip.freedyn.org/ DE
http://bot.whatismyipaddress.com/ US
http://whatismyip.org/ US
http://myexternalip.com/raw DE
http://wtfismyip.com/text US
http://domains.google.com/checkip part of Google
http://icanhazip.com/ http://ipv4.icanhazip.com/ http://ipv6.icanhazip.com/ US
http://checkip.feste-ip.net/ http://v4.checkip.feste-ip.net/ http://v6.checkip.feste-ip.net/ DE
http://ident.me/ http://ipv4.ident.me/ http://ipv6.ident.me/ UK
http://ddnss.de/meineip.php http://ip4.ddnss.de/meineip.php http://ip6.ddnss.de/meineip.php DE
http://checkip.spdyn.de/ http://checkip4.spdyn.de/ http://checkip6.spdyn.de/ DE
http://ifcfg.me/ip http://4.ifcfg.me/ip http://6.ifcfg.me/ip FR
http://nsupdate.info/myip http://ipv4.nsupdate.info/myip http://ipv6.nsupdate.info/myip DE
http://checkip.zerigo.com http://checkip4.zerigo.com/ http://checkip6.zerigo.com/ US
http://checkip.dyndns.com/ 1) http://checkipv6.dyndns.com/ 1) US + UK
http://checkip.dyndns.com:8245/ http://checkipv6.dyndns.com:8245/ US + UK
http://checkip.dyn.com/ 1) 2) http://checkipv6.dyn.com/ 1) 2) US + UK
http://ipv4.myip.dk/api/info/IPv4Address http://ipv6.myip.dk/api/info/IPv6Address US
http://ipv4.ipogre.com/linux.php http://ipv6.ipogre.com/linux.php US
http://v4.ipv6-test.com/api/myip.php http://v6.ipv6-test.com/api/myip.php FR
http://ipecho.net/plain NL
http://ipinfo.io/ip part of Amazon AWS
http://ifconfig.me/ip JP
http://checkip.amazonaws.com part of Amazon AWS
http://myip.dtdns.com US
http://ip.changeip.com US
http://freedns.afraid.org/dynamic/check.php ?
http://freedns.afraid.org:8080/dynamic/check.php ?

1) users reported timeout problems, use links in the line below (…:8245)
2) alias of *.dyndns.com

Enable minimum one configuration/section!
You need to enable ddns service!

Basics

Normally no user actions are required because ddns-scripts starts when hotplug ifup event happens. This will happen automatically at system startup when the named interface comes up. Event ifup also happens when a dialup network comes up.
ddns-scripts regularly check if there is a difference between your IP address at DNS and your interface. If different an update request is sent to DDNS provider.

  • Whenever you [Save & Apply] an Enabled configuration/section from LuCI webUI the corresponding script is automatically restarted.
  • If you modify '/etc/config/ddns' configuration file from console, you need to restart ddns-scripts (see below) to apply changes.

To check if ddns-scripts are running you could check inside LuCI via 'Status' → 'Processes'
or via console running

ps -w | grep dynami[c]

You should find something like '… /bin/sh /usr/lib/ddns/dynamic_dns_updater.sh myddns 0'
for every configuration/section you configured and enabled, where myddns shows your configuration/section name.

Inside LuCI also exists a section 'Dynamic DNS' at 'Status' → 'Overview' page showing the current status of your DDNS configurations.

Run manually

using LuCI

To check running ddns-scripts processes from the menu goto 'Status' → 'Processes'.
Look for something like '/bin/sh /usr/lib/ddns/dynamic_dns_updater.sh myddns 0'.
To stop a desired process press the [Terminate] or [Kill] button.
The process should remove from the list.

You can enable/disable and start/stop ddns-scripts from 'System' → 'Startup' menu.
Look for service 'ddns' and press the button for the desired action.

You can additionaly enable/disable and start/stop individual configuration/section from 'Overview'-page at 'Services' → 'Dynamic DNS'.

via console

From console command line you could create an 'ifup' hotplug event for the desired network interface. This will start all enabled ddns configurations/sections monitoring this interface.
:!: Keep in mind that also other service processes (i.e. firewall) might be (re-)started via 'ifup' hotplug event!
For INTERFACE, type the specified ddns-scripts interface name (the interface name from /etc/config/network, usually 'wan')

ACTION=ifup INTERFACE=wan /sbin/hotplug-call iface

To start only one ddns-scripts configuration/section (here 'myddns'):

/usr/lib/ddns/dynamic_dns_updater.sh myddns 0 &

To start all ddns-scripts configurations configured for one interface (the interface name from /etc/config/network, usually 'wan'):

sh
. /usr/lib/ddns/dynamic_dns_functions.sh	# note the leading period followed by a space
start_daemon_for_all_ddns_sections "wan"
exit

To stop one configuration/section you need to list running ddns processes with:

ps -w | grep dynami[c]

you will get something like:

2493 root      1440 R    {dynamic_dns_upd} /bin/sh /usr/lib/ddns/dynamic_dns_updater.sh myddns_1 0
2494 root      1440 R    {dynamic_dns_upd} /bin/sh /usr/lib/ddns/dynamic_dns_updater.sh myddns_2 0

now you need to kill every running process:

kill 2493		# to kill one process
kill 2493 2494		# to kill multiple processes

To stop all running processes at once ('killall' might not be available on all systems):

killall dynamic_dns_updater.sh				# if killall is available
ps | grep dynami[c] | awk '{print $1}' | xargs kill	# or if not available

Since BB 14.07 you could enable/disable and start/stop/restart all enabled ddns configuration/section like every other service:

/etc/init.d/ddns disable
/etc/init.d/ddns enable
/etc/init.d/ddns start
/etc/init.d/ddns stop
/etc/init.d/ddns restart

using scheduler

Each configuration/section of ddns-scripts can be configured to run once including retry on error so it is garanted that the update is sent to the provider.

To configure your configuration/section to run once you need to set 'option force_interval' to '0'. Setting of 'option force_unit' is ignored.
Inside LuCI set 'Force Interval' in [Timer Settings]-tab of your desired configuration
or edit '/etc/config/ddns' on console.

config 'service' 'myddns'
	...
	option 'force_interval'	'0'

If you set ddns service to enable then all configurations/sections are started during interface 'ifup'.
The configuration/section configured to run once will stop after successful update.
To garant that your configurations only run once not looking for an interface event you need to disable ddns service.
To start your configuration via build in crond use the following entry as command inside crontab configuration (replace 'myddns' with the name of your configuration/section):

/usr/lib/ddns/dynamic_dns_updater.sh myddns 0 &

Monitoring

Syslog

The 'option use_syslog' (also in LuCI) allows to define the level of events logged to syslog:

Value Reporting
0 disable
1 info, notice, warning, errors
2 notice, warning, errors
3 warning, errors
4 errors
:!: Critical errors forcing ddns-scripts to break (stop) are always logged to syslog. :!:

Logfile

ddns-scripts have built-in logfile support.
Logfiles are automatically truncated to a settable number of lines (default 250 lines).

Inside LuCI you could enable logfile in [Advanced Settings]-tab of desired configuration/section.
From console you need to edit '/etc/config/ddns' file:

config 'service' 'myddns'
	...
	option 'use_logfile'	'1'

To view logfile content from LuCI select the [Log File Viewer]-tab of desired configuration/section and press the [Read / Reread log file]-button. From console you should change to the ddns log directory (default '/var/log/ddns').
You will find a logfile for every configuration/section.

cd /var/log/ddns
ls -la
cat myddns_ipv4.log
cat myddns_ipv6.log

Debugging

To debug what's going on, you can run ddns-scripts in verbose mode.
Following verbose level are defined:

Level Description
0 Non verbose - No output
1 Output to console (default)
2 Output to console and logfile.
Run once WITHOUT retry on error.
3 Output to console and logfile.
Run once WITHOUT retry on error.
Sending NO update to DDNS service.

Before starting debugging stop all running ddns-scripts processes:

/etc/init.d/ddns stop
/etc/init.d/ddns disable

validate that no ddns-scripts processes running:

ps | grep dynami[c]

Now you can start one configuration/section for debugging. To stop/break running script press [CTRL]+C.
Replace 'myddns' with your desired configuration/section name and 'level' with the desired verbose level.

/usr/lib/ddns/dynamic_dns_updater.sh myddns level

You will get full description of errors and the output of programs like wget, nslookup etc. used by ddns-scripts

Common errors

Network and name resolution problems

Check your communication settings with the following commands:

nslookup google-public-dns-a.google.com
 
ping -c 5 google-public-dns-a.google.com
ping -c 5 -4 google-public-dns-a.google.com	# (-4) force IPv4 communication
ping -c 5 -6 google-public-dns-a.google.com	# (-6) force IPv6 communication if installed
 
wget -O- http://checkip.dyndns.com		# for IPv4
wget -d -O- http://checkipv6.dyndns.com		# for IPv6 needs wget package and IPv6 to be installed
curl -v http://checkipv6.dyndns.com		# for IPv6 needs curl package and IPv6 to be installed

HTTPS/SSL problems

Check if your DDNS provider ONLY supports secure requests and enable HTTPS (option use_https) in your configuration.
Packages 'wget' or 'curl' not installed to support secure communication.
'wget'/'curl' could not access/validate SSL certificates.
Check certificate installation and run 'wget' or 'curl' in verbose/debug mode:

ls -la /etc/ssl
ls -la /etc/ssl/certs
 
wget -d -O /tmp/wget.out https://www.google.com --ca-certificate=/etc/ssl/certs/ca-certificates.crt	# single certificate file
wget -d -O /tmp/wget.out https://www.google.com --ca-directory=/etc/ssl/certs		# certificate directory
wget -d -O /tmp/wget.out https://www.google.com --no-check-certificate			# ignore certificate !!! INSECURE !!!
 
curl -v -o /tmp/curl.out https://www.google.com --cacert /etc/ssl/certs/ca-certificates.crt	# single certificate file
curl -v -o /tmp/curl.out https://www.google.com --capath /etc/ssl/certs		# certificate directory
curl -v -o /tmp/curl.out https://www.google.com --insecure			# ignore certificate !!! INSECURE !!!

Overview

Remember to read how to configure a custom service.
At provider specific settings, only parameters that needs to be changed are described.
The relevant parameters to use together with a custom settings are:

UCI option LuCI description Explanatory note
service_name DDNS Service provider Inside LuCI set to '–custom–' or delete from '/etc/config/ddns' if you need to use custom update URL.
update_url Custom update-URL Copy from description below, if necessary.
domain Hostname/Domain The already registered name at your DDNS provider.
:!: Must be your public FQDN because used by nslookup command to check if the send IP update was recognized by your provider and published around World Wide DNS.
username Username Normally your username but possibly used with different settings.
password Password Normally your password but possibly used with different settings.

If you find a FIXME at a provider description below, please support the ddns-scripts maintainer to test and update this page.
Please post a support request if something is not working as described or needs to be updated.
Thanks!

If you find problem “Failed writing HTTP request: Bad file descriptor” in some server / wget version (see: https://bugzilla.redhat.com/show_bug.cgi?id=912358), it is worth to try changing the update_url in /etc/config/ddns from

"http://[USERNAME]:[PASSWORD]path_to_your_provider_and_other_things"

to

"--user=[USERNAME] --password:[PASSWORD] http://path_to_your_provider_and_other_things"

AND change one line in /usr/lib/ddns/dynamic_dns_updater.sh from

update_output=$( $retrieve_prog "$final_url" )

to

update_output=$( $retrieve_prog $final_url )

dnsomatic.com

Last updated: 2015-07-28
HomepageDocumentation

The default is to use 'domain' together with 'service_name' set to 'dnsomatic.com'.
'domain' needs to be set to FQDN to update/verify. :!: NEVER use 'all.dnsomatic.com'!

To update all services registered with DNS-O-Matic in one configuration/section use the following settings:

service_name	delete / --custom--
update_url	http://[USERNAME]:[PASSWORD]@updates.dnsomatic.com/nic/update?hostname=all.dnsomatic.com&myip=[IP]&wildcard=NOCHG&mx=NOCHG&backmx=NOCHG
domain		[Only ONE of your defined hostnames to verify update was send]
username	[Your username]
password	[Your password]

duckdns.org

Last updated: 2015-07-14
HomepageInstallation instructionsFAQ

FIXME There is another description here. I take over the link during rewriting this wiki page. DELETEME

Inside LuCI web UI select –custom– and fill in the other options accordingly.
:!: Be sure you install ssl support.
Additional use update_url and settings from below:

update_url	http://www.duckdns.org/update?domains=[USERNAME]&token=[PASSWORD]&ip=[IP]
domain		[Your FQDN]
username	[Your Host without ".duckdns.org"]
password	[Your token]
use_https	1
cacert		[path to certificate file or directory]

freedns.afraid.org

Last updated: 2015-07-15
HomepageFAQ

Option 1: FIXME

service_name	freedns.afraid.org
domain		[Your FQDN]
username	[NOT used. Set to a character of your choice, because LuCI does not accept empty field]
password	[Your authorisation token, NOT your account password]

To find your authorisation token, go to http://freedns.afraid.org/dynamic/, login, click “Direct URL”.
On the location bar of your browser, copy the authorisation token,
which is the part after http://freedns.afraid.org/dynamic/update.php? url
and paste it in the password field.

Option 2: FIXME (Taken from here.)

service_name	delete / --custom--
update_url	[Your direct URL updater from your freedns.afraid.org account]
domain		[Your FQDN]
username	[NOT used. Set to a character of your choice, because LuCI does not accept empty field]
password	[NOT used because already part of direct URL. Set to a character of your choice, because LuCI does not accept empty field]

gratisdns.dk

Last updated: 2015-07-20
Homepage (Danish only)

Taken from OpenWrt forum

GratisDNS.dk is only supported by ddns-scripts using custom service settings.
GratisDNS.dk require to install and configure SSL support.

service_name	delete / --custom--
update_url	http://ssl.gratisdns.dk/ddns.phtml?u=[USERNAME]&p=[PASSWORD]&d=Mydomain&h=[DOMAIN]&i=[IP]
		!!! replace "Mydomain" in this url with domain part of your FQDN.
		Sample: your FQDN: host.example.com -> "Mydomain" set to example.com
		Sample: http://ssl.gratisdns.dk/ddns.phtml?u=[USERNAME]&p=[PASSWORD]&d=example.com&h=[DOMAIN]&i=[IP]
domain		[Your FQDN]
username	[Your username]
password	[Your password]

he.net

Last updated: 2015-07-15
Homepage

FIXME There is another description here. I take over the link during rewriting this wiki page. DELETEME

Use the following settings:

service_name	he.net
domain		[Your FQDN]
username	[Your FQDN]
password	[Your password]

mythic-beasts.com

Last updated: 2015-07-20
HomepageSupport

FIXME
Looking on description at “Use Mythic Beasts Dynamic DNS with your OpenWRT router” and on the existing source code I found out that there must be issues updating Dynamic DNS.
I have gone in contact with support of mythic-beasts.com. I will update as soon a solution is available.

namecheap.com

Last updated: 2015-07-21
HomepageKnowledgebase

Note that with the namecheap protocol, the username option is translated to the host argument in the update request.
Therefore, it should be the host-part on the DNS record, not the username that you use to log into the namecheap.com site.
To update multiple hosts you might need to define separate configuration/section for each host.
To get your password, log into the namecheap.com site, enter the management console for the domain, and click the Dynamic DNS menu option.

:!: Currently ddns-scripts only supports the case where your dynamic subdomain has the same IP address as for your unqualified domain. Otherwise you will send updates to namecheap.com every “option check_interval” 10 minutes (default) because your FQDN is not validated. Proposed solution here, which you can easily implement yourself. (This may only be an issue for ddns-scripts 2.4).

Let assume you define two FQDN at your domain “example.com”: “www.example.com” and “ftp.example.com“
To update only your domain record “example.com”:

service_name	namecheap.com
domain		[Your domain, here: example.com]
username	@
password	[Your password]

To update for example only your ”ftp.example.com” host:

service_name	namecheap.com
domain		[Your domain, here: example.com]
username	ftp
password	[Your password]

To update all to the same IP address:

service_name	namecheap.com
domain		[Your domain, here: example.com]
username	@ -a www -a ftp
		!!! @ stands for your domain, www for www.example.com, ftp for ftp.example.com
password	[Your password]

noip.com

Last updated: 2015-07-21
HomepageSupportCenter

:!: Starting CC 15.05 do not forget to additional install ddns-scripts_no-ip_com package.

The default is to use your 'username' and 'password' as normal inside ddns-scripts together with 'service_name' 'no-ip.com' or 'noip.com'.

If you want to update multiple hosts inside one configuration/section you need the following settings:

service_name	delete / --custom--
update_url	http://[USERNAME]:[PASSWORD]@dynupdate.no-ip.com/nic/update?myip=[IP]&hostname=

		!!! After the 'hostname=' fill in a comma separated list of hosts to update.
		Sample: host1.example.com,host2.example.com,host3.example.com without any spaces in between.
		Sample: http://[USERNAME]:[PASSWORD]@dynupdate.no-ip.com/nic/update?myip=[IP]&hostname=host1.example.com,host2.example.com,host3.example.com

domain		[Only ONE of your defined hostnames, i.e. host1.example.com]
username	[Your username]
password	[Your password]

spdyn.de (old spdns.de)

Last updated: 2016-08-02
HomepageWiki/FAQ (German only)

The web-pages of spdns.de are now reachable at spdyn.de.
Currently updates send to update.spdns.de pages are still handled but produce warnings in DDNS update log at the provder.
Created accounts and domains at spdns.de are still working without any problems.

The default is to use your 'username' and 'password' as normal inside ddns-scripts together with 'service_name' 'spdyn.de'.
If you want to use Update-Token, keep in mind that this token can only update the host it is generated for.
Use this settings:

service_name	spdyn.de
domain		[Your defined hostname at spdyn.de]
username	[Your defined hostname at spdyn.de]
password	[The token generated for this hostname]

If you want to update multiple hosts inside one configuration/section you need the following settings (Update-Token doesn't work):

service_name	delete / --custom--
update_url	http://[USERNAME]:[PASSWORD]@update.spdyn.de/nic/update?myip=[IP]&hostname=

		!!! After the 'hostname=' fill in a comma separated list of hosts (max. 20) to update.
		Sample: host1.spdyn.de,host2.spdyn.de,host3.spdyn.de without any spaces in between.
		Sample: http://[USERNAME]:[PASSWORD]@update.spdyn.de/nic/update?myip=[IP]&hostname=host1.spdyn.de,host2.spdyn.de,host3.spdyn.de

domain		[Only ONE of your defined hostnames i.e. host3.spdyn.de]
username	[Your username at spdyn.de]
password	[Your password at spdyn.de]

domains.google.com

Last updated: 2016-04-20

Google Domains allows for dynamic names to be set up in the section called Synthetic Records. To access it, log in to https://domains.google.com and go to Configure DNS for the domain in question, then scroll down to Synthetic Records and add a new one. It will issue a specific username and password for this hostname. Google requires HTTPS for updates, so be sure to also install package wget or curl in order to allow this. Use the following settings:

service_name	--custom--
update_url	http://[USERNAME]:[PASSWORD]@domains.google.com/nic/update?hostname=[DOMAIN]&myip=[IP]
domain		[Your defined hostname]
username	[assigned username for hostname]
password	[assigned password for hostname]
http_secure	Enabled
ca_path		Set to "IGNORE" or download certs and provide path